3.5 Tons Single Post Underground Car Lift (F3500D)

3.5 Ton Single Post Underground Car Lift(F3500D)Brief Introduction:The machine adopts low pressureoil driving,so it is simple,reliable and convenient inmaintenance.The main unit of F Series Inground Lift is installedunder the ground with only bracket arm above.Lay the damaged car onthe bracket arm and press the "UP" button.After the car is liftedto the proper height,repair can be started.After therepairing,press the"DOWN' button.When car was lowered to the groundwith the bracket arm,drive it away.Control cabinet is set on theground for convenient operation.Features:The bore and piston oflifting cylinder use the high-quality alloy steel as the materialwith hard chromium coated,so it is quite durable.The seal ofcylinder is Parker,which is excellent in sealing property and longservice life.Pipeline explosion valve is equippied inside thecylinder.It can ensure the security when there are uncommonconditions on oil pressure pipeline.The lifting columns of two postand multi post lifts are rigidly connected with synchronousbeam(separated type),so it is excellent in synchronous performanceand steady.Equipped with mechanical pneumatic locks,it can stop inany position automatically to ensure safety.Technical Parameters:

No	Parameter	Unit	Value
1	Max lifting capacity	kg	3500
2	Max.Lifting height	mm	1850
3	Entire Lifting(Dropping)Time	sec	40-60
4	Supply Voltage	V/HZ	AC220/380V/50HZ; AC230/400V/50HZ
5	Power	KW	3
6	Motor Speed	rounds/minute	2870
7	Output of oil pump	ml/round	2
8	Set pressure of the overflow valve	bar	130
9	Solenoid valve pressure	V/HZ	AC220V/50HZ
10	Voltage of mechanical lock electromagnet	V/HZ	AC220V/50HZ
11	Sound level (measured at control console)	dBA	≤75
12	Main unit length	mm	420
13	Main unit width	mm	420
14	Main unit height	mm	2270
15	N.W	KG	780

 

3.5 Tons Single Post Underground Car Lift (F3500D)

3.5 Tons Single Post Underground Car Lift (F3500D)